4.2.5
Hold value registers
The addresses 6, 7 and 14,15 store the hold values for channel 1 and channel 2
respectively.
These data can be read into the T3. Writing data into these addresses is prohibited.
<Channel 1>
F
No use (always 0)
<Channel 2>
F
No use (always 0)
The hold value is 24-bit length.
The lower address stores the lower 16-bit of the hold value.
The higher address stores the upper 8-bit of the hold value.
These subsequent 2 addresses configure 24-bit hold value register.
The upper 8 bits of the higher address are all 0.
8 7
Hold value (upper)
Address 7
8 7
Hold value (upper)
Address 15
4. Register Configuration
0 F
Hold value (lower)
Address 6
0 F
Hold value (lower)
Address 14
0
0
41
User's Manual