Login - HikRobot SC3000 Series Quick Start Manual

6. Click OK.

5.5 Login

Note
● Make sure that your device IP address is in the same network segment with the PC where you
installed the client software before connecting the device to it.
● The default login password is Abc1234, and it is highly recommended to change the password for
the first time use.
● Follow the guidance to find the password if you forget it.
● Refer to the user manual of the SCMVS client software for detailed operation.
Steps
1. Click the device in the device list.
2. Enter password.
3. Click to log in.
SC3000 Series Vision Sensor Quick Start Guide
Figure 5-4 Edit IP Address
10