Airflow Sensor + Grid 120 * 120 * 10Mm Nc; Smoke Detector (Mod. M206-5E) - NetPing Input+Relay R404 User Manual

Table of Contents

Advertisement

[ENG] NetPing Input+Relay R404, User guide -[ENG] 7. [DKST 57]Connection of external sensors and actuators.
The sensor comes with a non-detachable cable with lugs at the ends.
using cable 4 extender,
cable section of at least 0.4 mm2. The maximum permissible loop length is 100 meters.

Airflow sensor + GRID 120 * 120 * 10mm NC

The sensor is a dry contact, so the order of wiring is irrelevant. The number of connected sensors is limited only by
the number of free IN lines.
Second wire
Depending on which input (IN1-IN16) the sensor is connected to on the terminal block, on that IN1-IN16
channel it is displayed in the device web interface.
The sensor comes with a non-detachable cable with lugs at the ends.
using cable 4 extender,
cable section of at least 0.4 mm2. The maximum permissible loop length is 100 meters.

Smoke detector (mod. M206-5E)

The number of connected smoke detectors (mod. M206-5E) is limited only by the number of free IN lines.
Wire
Terminal
Red
+12V
Black
GND
Green
Одна из OUT линий – 1 - 16
White
GND
4m, which are connected in series into each other, or independently using any wire with a
Wire
First wire
4m, which are connected in series into each other, or independently using any wire with a
The cable length can be increased by
IN1 ... IN16
GND
The cable length can be increased by
[ENG] 7. [DKST 57]Connection of external sensors and actuators.
Terminal
                             – 

Advertisement

Table of Contents
loading

Table of Contents