Step 4 - NetPing Input+Relay R404 User Manual

[ENG] NetPing Input+Relay R404, User guide -[ENG] 6. [DKST 57]Connection, installation and initial configuration of the device
If available, connect an external battery module to the device.
The correct operation of the device can be determined by the operation of the CPU indicator - it should blink 5-6
times and light up continuously. Flashing the LINK indicator will tell you about network activity on the ports.

Step 4

Connect to the device's web interface. The default device has the following settings:
• IP-адрес: 192.168.0.0/24
[ENG] 6. [DKST 57]Connection, installation and initial configuration of the device
–