[ENG] NetPing Input+Relay R404, User guide -[ENG] 6. [DKST 57]Connection, installation and initial configuration of the device
•
Gateway: 0.0.0.0
•
Login: visor
•
Password: ping
Thus, the initial connection to the device is possible only from one subnet (192.168.0.0/24).
Next, update the firmware to the current one and configure the network in the way you need.
Step 5
Connect the sensors and/or load according to section 7. Connecting external sensors and actuators.
[ENG] 6. [DKST 57]Connection, installation and initial configuration of the device
–