Installation Requirements
BEFORE THE SET UP, MAKE SURE:
Avoid use on shiny / reflective
surfaces such as aluminium, glass
or similar.
Reflection could cause malfunction
of the sensor
Installation MUST be by a certified
•
plumber and adhere to AS3500 and
manufacturer's recommendations.
Lines must be flushed before
•
installation
provided must be installed to
prevent
cartridges.
*Use 350Kpa pressure reducing valve for extended life and better operation
8
and
the
strainer
debris
damaging
Reflective surfaces could cause nuisance
triggering and activate the sensor when
installed out of the suggested minimum
clearance. See images bellow
the