Table of Contents
Advertisement
Installation Instructions
BUBBLERS
TFT8000, TFT8050, TFT8050UR, TFT8050URL
For all Units:
1.
Flush the new pipe prior to installation.
2.
Bubblers should be installed with isolating stop tap valve.
3.
Install the Flow regulator and place the strainer in the inlet connection before screwing the
valve to the water inlet.
4.
Screw the bubbler to the water inlet.
Important Information
We do not recommend dismantling
the internal parts of the tapware set.
The tapware are individually factory
assembled and tested to give the
best performance.
*Use 350Kpa pressure reducing valve for extended life and better operation
8
Thread
5.
The drinking taps are fitted with a flow
regulator. When applying thread tape or
sealant to the inlet, ensure the opening is
not obscured.
*
Failure to do so may restrict or block the
flow regulator affecting the flow of water.
Thread
Advertisement
Table of Contents
