Control Panel; First Use - CDA VC820 Use And Maintenance

Control panel

Note: Throughout this manual, references in brackets refer to
the legend in this section.
2 3 4 5 6 7 8
1 Display
2 MENU touch key to activate or deactivate menu
3 Return touch key to exit the selected mode
4 Rinse touch key
5 Scroll touch key to scroll forward through the menu and
display
6 Coffee strength key to adjust strength or pre-ground
7 Scroll touch key to scroll backwards through the menu and
display
8 Cup touch key
(espresso, small cup, medium cup, large cup, mug)
9 OK touch key to confirm the selected function
10 One cup touch key
11 Two cups touch key
12 Cappuccino touch key
13 Hot water touch key
10 | Instruction Manual
1
9 10 11 12 13

First use

The first time you switch on the appliance with
the main switch (see 'A' on page 8) and every
time that it is plugged in, the appliance executes
a 'SELF-DIAGNOSIS' action. Then the appliance
switches off. To turn it on again press the on/
stand by button (see 'A1' on page 8) on the left
side underneath the control panel.
Fig.2
Note: Coffee has been used in the factory to test the
appliance and is therefore completely normal for there to be
traces of coffee in the mill.
1. Connect the appliance to the mains
supply
2. Switch on the appliance with the main
switch (see 'A' on page 8)
3. Start the appliance with the 'on/stand by
button' (see A1 on page 8 or Fig. 3)
4. Set the required language by pressing
MENU and then OK, scroll through the
language options using keys 5 and 7 on
the control panel and press OK once
the desired language is reached. After
5 seconds, the appliance displays the
selected language
5. Extract the water tank, rinse and fill
with fresh water without exceeding the
MAX line, replace and push tank back in
(Fig.4)
Fig. 3
Fig. 4
Instruction Manual | 11