Rinsing; Statistics; Resetting The Appliance To Factory Settings; Setting The Clock - CDA VC820 Use And Maintenance

Rinsing

If 2/3 minutes have passed, since you last made coffee, you should
first rinse the system to preheat the brewing unit. Select the rins-
ing function from the appropriate menu. Let the water run into the
drip tray underneath. You can also use this water to warm up the
cup that you are using for the coffee. In this case simply let the hot
water run into the cup (and then empty it).
1. Press the touch key 'RINSE' (4)
2. The appliance performs an automatic rinse cycle (a little hot
water runs out of the spouts and is collected by the drip tray
beneath)

Statistics

This appliance can give you the following usage data:
• Total number of coffees made with the appliance up to that point
• Number of descaling procedures carried out
• Number of cappuccinos made
• Number of litres of water
2 cups of coffee dispensed at the same time counts as 2 cups
Proceed as follows to look up the values:
1. Press the touch key 'MENU' (2) and press the scroll touch keys
(5 and 7) until the menu option "STATISTICS" appears. Confirm
the menu option with the touch key 'OK' (9).
2. The number of cups dispensed so far appears on the display,
e.g. "TOT. COFFEES 135".
3. Repeatedly press the scroll touch key (7) to show the number
of descaling procedures carried out, e.g. "TOT. DESCALES 5",
"TOTAL WATER" and then number of cappuccinos, e.g. "TOT.
CAPPUCCINO 135".
28 | Instruction Manual

Resetting the appliance to factory settings

This function resets previously changed values to the factory set-
tings. The following settings or saved data are affected:
• Coffee, water and cappuccino quantity
• Water hardness
• Coffee temperature
• Switch-off time
• Switch-on time
• Display
The factory default values can be reset as follows:
1. Press the touch key 'MENU' (2) and press the scroll touch keys
(5 and 7) until the menu option 'RESET TO DEFAULT' appears.
Confirm the menu option with the touch key 'OK' (9)
2. The display shows 'PLEASE CONFIRM'
3. Confirm the menu option with the touch key 'OK' (9)

Setting the clock

1. Press the touch key 'MENU' (2) to enter the menu and then the-
scroll touch keys (5 and 7) until "SET CLOCK" is displayed
2. Press the touch key 'OK' (9)
3. Use the scroll touch keys (5 and 7) to set the hours, then press
the 'OK' (9) to confirm
4. Use the scroll touch keys (5 and 7) to set the minutes, then
press the touch key 'OK' (9) to confirm
5. Press the touch key 'RETURN' (3) to exit the menu
Instruction Manual | 29