Table of Contents
Advertisement
Installation
Position the rails on the sides of the cabinet as shown in Fig. 40 Fix
with the screws, then extend the rails fully.
If the coffee maker is installed over a warming drawer, use the
top surface of this as a reference to position the rails. In this
case, there will be no lower shelf to rest the rails on.
16
Fig. 40
Position the appliance on the rails as shown in Fig. 41 making
sure the pins are correctly inserted in the housings, then fix it
with the screws supplied.
If the height of the appliance requires adjusting, use the spacer
disks provided.
46 | Instruction Manual
1mm
x 4
x 8
Fig. 41
Fix the power cable with the clip as shown in Fig. 42
The power cable must be long enough to allow the appliance to
be extracted from the cabinet to fill the coffee bean container.
If necessary, correct alignment of the appliance by positioning
the spacers supplied under or at the sides of the support
(Fig. 43)
Fig. 42
1
Fig. 43
x 4
Instruction Manual | 47
Advertisement
Table of Contents
