Table of Contents
Advertisement
Changing the quantity of milk and coffee for
cappuccino
This appliance is set by default to automatically deliver a
standard cappuccino. To change these quantities, proceed as
follows:
Changing the quantity of milk
1. Fill the container with milk up to the maximum level indicated
on the container
2. Press the touch key 'MENU' (2) to enter the menu
3. Press the 'Scroll' touch keys (5 and 7) until "PROGRAM
CAPPUCCINO" is displayed
4. Press the touch key 'OK' (9) to confirm. "PROGRAM MILK" is
displayed
5. Press the touch key 'OK' (9) again
6. Select the quantity of milk required by pressing the 'Scroll'
touch keys (5 and 7). The progress bar shows the quantity of
milk selected
7. Press the touch key 'OK' (9) to confirm or the 'Return' touch
key (3) to cancel the operation)
8. Press the 'Return' touch key (3) twice to exit the menu
Changing the quantity of coffee
1. Follow steps 2 & 3 as listed above
2. Press the 'Scroll' touch keys (5 and 7) until "COFFEE FOR
CAPPUCC" is displayed
3. Press the touch key 'OK' (9) again
4. Select the quantity of coffee required by pressing the 'Scroll'
touch keys (5 and 7). The progress bar shows the quantity of
coffee selected
5. Press the touch key 'OK' (9) to confirm or the 'Return' touch
key (3) to cancel the operation)
6. Press the 'Return' touch key (3) twice to exit the menu
22 | Instruction Manual
Tips for coffee making
•
3 minutes after you made your last coffee, you can preheat
the brewing unit by using the menu setting "RINSING (see
Rinsing). Run off the water into the underlying drip tray or
alternatively use this water to fill (and then empty) the cup to
be used for the coffee.
•
Do not use cups that are too thick, as they will absorb too
much heat.
•
You can stop the coffee from dispensing by pressing the
'One cup' of coffee deliver' touch key (10) or 'Two cups' of
coffee deliver' touch key (11) again, or by selecting
"ESPRESSO CUP" with the 'Type/quantity of coffee' touch
key (8).
•
After the coffee has finished dispensing (the progress bar
reaches 100%), you can increase the amount of coffee by
pressing and holding the 'One cup of coffee' touch key until
the desired amount of coffee is reached.
•
When the display shows the message "FILL TANK!". You must
fill the tank, otherwise the appliance cannot make any cof-
fee. It is normal that there is some water left in the water tank
when the message is displayed.
•
Every 14 single coffees (or 7 doubles) the appliance displays
"EMPTY WASTE COFFEE CONTAINER". This means that
the waste coffee container is full and must be emptied and
cleaned.
•
The appliance counts the number of coffees made. As long
as the waste coffee container is not cleaned, this message
remains in place and the coffee machine cannot make any
coffee. To clean, open the service door at the front by pulling
the coffee spout, remove the drip tray, empty it and clean it.
Instruction Manual | 23
Advertisement
Table of Contents
