Installation - CDA VC820 Use And Maintenance

Installation

• After removing the packaging, make sure the product is
complete and undamaged. If in doubt, do not use the appliance
and contact a qualified professional
• Installation must be carried out by a qualified technician and in
compliance with current regulations
• Packing elements (plastic bags, polystyrene etc.) must not be
left within reach of children as they may represent a hazard
• Never install the appliance in environments where the
temperature may reach 0°C or lower (the appliance may be
damaged if the water freezes)
• Make sure the mains voltage corresponds to the voltage
indicated on the appliance rating plate. Connect the appliance
to an efficiently earthed socket with a minimum current rating of
13A only
• The manufacturer may not be considered liable for possible
incidents caused by the failure to adequately earth the mains
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary
• Never touch the plug with damp hands
• Never pull the power cable as you could damage it
• This appliance can be installed over a built-in oven it the latter
is fitted with a cooling fan at the rear (maximum power: 3KW)
• Do not use multiple plug adapters or extension leads
• The power cable on this appliance must not be replaced by the
user as this operation requires the use of special tools. If the
cable is damaged or requires replacing, contact an authorised
service centre only to avoid all risks
• You should personalise water hardness as soon as possible
following the instructions.
44 | Instruction Manual
Installation
Please check the minimum measurements necessary to the correct
installation of the appliance. The coffee machine must be installed
in a column unit, which must in turn be fixed to the wall.
IMPORTANT! Kitchen furniture in direct
contact with the appliance must
be heat resistant (65°C min).
5 6 0
m m
8 0 m
m
m i n .
m m
8 0
.
m i n
m m
5 5 0
m m
. 5 0
m i n
.
m i n
Instruction Manual | 45