Table of Contents
Advertisement
Setting the language
You can choose between several languages. A different
language can be selected as follows:
1. Press the touch key 'MENU' and press the scroll touch
keys (5 and 7) until the menu option 'CHOOSE LANGUAGE'
appears. Confirm the menu option with the touch key 'OK' (9)
2. The language set appears on the display. Press the scroll
touch keys (5 and 7) until the desired language appears.
When the desired language is displayed, confirm with the
touch key (9)
Water hardness
A "PLEASE DESCALE!" message is displayed after the appliance
has been operated for a factory set period of time, calculated
on the basis of the maximum quantity of limescale which may be
contained in the water used. If necessary, this period of operation
can be extended, making descaling less frequent, by programming
the appliance based on the actual lime content in the water used.
Proceed as follows:
1. Remove the "total hardness" test strip (in front of this manual)
and dip it fully in water for a for a few seconds. Remove it
and wait 30 seconds until its colour changes and a number
of red dots are formed. For example if there are 3 dots on
the test trip you must set the water hardness to level 3
2. Press the touch key 'MENU' (2) and press the scroll touch
keys (5 and 7) until the menu option 'WATER HARDNESS' is
displayed. Confirm the menu option with the touch key 'OK'
(9)
3. The display shows the current setting. Press the scroll touch
keys (5 and 7) until the required hardness level is displayed.
Confirm the selection with the touch key 'OK' (9)
24 | Instruction Manual
Setting the coffee temperature
You can choose between three temperature levels. The coffee
temperature levels are defined as follows:
•
TEMPERATURE LOW
•
TEMPERATURE MEDIUM
•
TEMPERATURE HIGH
The factory setting is TEMPERATURE HIGH. You can change this as
follows:
1. Press the touch key 'MENU' (2) and press the scroll touch keys
(5 and 7) until the menu option "TEMPERATURE" appears.
Confirm the menu option with the touch key 'OK' (9)
2. The display shows the current setting. Select another temper-
ature with the scroll touch keys (5 and 7). When the desired
temperature is displayed, confirm it with the touch key 'OK' (9)
Setting the switch-off time
The appliance is set by default to go off automatically 30 minutes
after the last coffee has been made. To change this interval (max.
120 min), proceed as follows:
• AUTO SHUT OFF TIME 1/2 hour
• AUTO SHUT OFF TIME 1 hour
• AUTO SHUT OFF TIME 2 hour
You can change this as follows:
1. Press the touch key 'MENU' (2) and press the scroll touch keys
(5 and 7) until the menu option "AUTO SHUT OFF TIME"
appears. Confirm the menu option with the touch key 'OK' (9).
2. 2. Select another switch-off time with the scroll touch keys (5
and 7). When the desired switch-off time is displayed, confirm it
with the touch key (9)
Instruction Manual | 25
Advertisement
Table of Contents
