6-13. Data Sync between Display Controllers
The setting data of the primary controller is set to all sub controllers.
This function is used, for example, when you configure a new system with display controllers used in
other system.
The following setting data is not synced.
. Connection information (IP address/COM port)
. Display unit layout address
1. Display the Main screen.
2. Check that [Power ON] has been active.
3. On the menu bar, click [Tool], and then click [Sync Controller Data]. (The screen varies depending on
the Display Control Software version.)
The following dialog is displayed.
4. Click [OK].
When the data sync is completed, the following dialog is displayed.
5. Click [OK].
The display returns to the Main screen.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-37 (E)