System Settings - Sony ZRD-1 Installation Manual

6-6. System Settings

The items for the whole system are set.
The settings are reflected on all display controllers including the sub controller based on the primary
controller settings. As for the sub controller, it cannot be set individually.
When the settings are changed, they are reflected immediately.
1. Display the Main screen.
2. Check that [Power ON] has been active.
n
You cannot set the items in System Settings if the power is not supplied to the system.
3. On the menu bar, click [Function], and then click [System Settings]. (The screen varies depending on
the Display Control Software version.)
The System Settings screen is displayed.
Screen example (The screen varies depending on the Display Control Software version.)
Version earlier than 1.20.0
6-20 (E)
Version 1.20.0 through earlier than 1.22.0
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200