Sony ZRD-1 Installation Manual page 61

2. Visually align the display unit.
Alignment in the X direction: Align the display unit to the position where the joint coma (SIDE) of
Alignment in the Z direction: Align the end face of the joint coma (BTM) of the display unit to be
Alignment in the Z direction
Z
Alignment in the X direction
Joint comas (SIDE)
Display unit already installed
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
the display unit to be installed comes into contact with the joint coma of
the adjacent display unit.
installed with the end face of the display unit already installed.
In the case of the first row, align the end face of the lower joint coma
(SIDE) of the display unit to be installed with the end face of the joint
coma of the display unit already installed. At the same time, align it to
the position almost parallel to the end face of the base.
X
Alignment in the Z direction in the first row
Contact portions
Joint coma (SIDE) of
the display unit to be installed
Display unit to be installed
End face of joint coma (BTM)
End face of display unit already installed
Display unit already installed
Lower joint coma (SIDE)
Joint coma (SIDE) of
the display unit already installed
Align the end face.
Place the display unit so that its end face
is parallel to the end face of the base.
End face of base
2-27 (E)