Changing The Ip Address Of Display Controller - Sony ZRD-1 Installation Manual

6-2. Changing the IP Address of Display Controller

This is the procedure need to be done only once when establishing the system using the Ethernet connec-
tion (LAN). In the case of using the USB connection (SERIAL), this procedure is not required.
Required items
. Controller PC
. Display controller (all controllers)
. Power cord of display controller
. USB cable (mini-B plug)
Connection
1. Connect the power cord to the display controller.
t
IP address is changed in the system standby state.
2. Connect the display controller and controller PC using the USB cable.
n
When the Ethernet cable is connected to the CTRL 1 connector of the display controller, disconnect
it.
3. Start the controller PC.
4. Start the Display Control Software.
The Main screen before initial settings is displayed. (The screen varies depending on the Display
Control Software version.)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
USB cable Controller PC
6-5 (E)