Sony ZRD-1 Installation Manual page 90

Procedure of turning on and off the power
. Turn on/off the power in the following order to prevent the system malfunction.
When turning on the power
1 Turn on the power of display unit. → 2 Turn on the power of display controller. → 3 Turn on the
power of video source equipment.
When turning off the power
1 Turn off the power of video source equipment. → 2 Turn off the power of display controller. →
3 Turn off the power of display unit.
Others
. In order to control the inrush current into the display unit, it is recommended to use the power-on delay
function. By using this function, the power-on time for each display unit can be shifted as it has been
set. For details, refer to "Display Unit Power On Delay" in "6-6. System Settings".
. Do not cover the power socket of the display unit. The connecting portion of the power socket should
be visually checked.
4-2 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200