Hyundai RTC 1028 RIP Instruction Manual page 35

USB RECORDING
1. RADIO RECORDING
Be sure the RADIO REC button at back side is on ON position, blue LCD display will light
on. Plug U DISK into USB socket. Then press RADIO button, press BAND button to choose
AM or FM. Adjust Tuning receive the desired station. Press RECORD button twice to start
recording. Press STOP button to stop recording when you finished recording.
2. CD RECORDING
Plug U DISK into USB Socket .Then press CD/USB button. Place CD into the CD drawer,
Play the track which will be recorded. Press RECORD button twice to start recording.
If whole CD will be played, recording will be effected for all the tracks.
Each audio track coincides with its MP3 file, stop recording manually.
NOTE: Recording will be fail if press STOP Button during the recording.
MP3 DISC RECORDING
Plug U DISK into USB Socket .Then press CD/USB button, place CD into the CD drawer,
Play the track which will be recorded. Press RECORD button twice to start recording.
If whole MP3 CD will be played, recording will be effected for all the tracks, stop recording
manually.
NOTE: Recording will be fail if press STOP button during recording.
PHONOGRAPH RECORDING
Plug U DISK into USB Socket. Then press PHONO button. Play the phono,
and set the tone arm to the right place. Press RECORD button twice to start recording.
Press STOP button () to stop recording when you finished recording.
3. AUX IN RECORDING
Plug U DISK into USB Socket .Connect the audio system into the AUX IN jack on the rear
panel. Press AUX IN button. Play the audio system which you want to record.
Press RECORD button twice to start recording. Press STOP button () to stop recording
when you finished recording.
4. DELETE TRACKS FROM U DISK
Plug U DISK into USB socket. Then press CD/USB button on panel or long press PLAY/
PAUSE button on Remote control to chose USB mode. During playing select the track,
press for at least 2 seconds DELETE and track will be deleted.
RADIO OPERATION
1. Press POWER to turn the system on The power indicator comes ‚on'.
2. Press BAND button, then press BAND button, the indicator light under BAND button is ‚on',
it is FM station. Press BAND button again, the indicator light under BAND button is ‚off',
it is AM station.
3. When you have finished your listening, press POWER again to turn the system off.
The POWER indicator backlight go ‚off'
NOTE: If noises during AM/FM reception, put RADIO REC control on OFF position.
EN - 35
EN