Adding A Bargraph Or Joystick Button; Setting Bargraph And Joystick Properties; Setting The Level Code - AMX AXB-TPI/3 Instruction Manual

Designing Touch Panel Pages

Adding a bargraph or joystick button

Create a new button using the Add operation bar in the
1. Press
2. Press
3. Press any button to open the Button Properties page.
4. Press
Button Properties page.

Setting Bargraph and Joystick Properties

Use the Button Properties page to set channel, level, and button colors. Refer to the Setting the
variable text code section on page 32 and the Setting the channel code section on page 31 for
further information. Refer to the Setting the button colors for channel-off conditions section on
page 32 for more information on colors for channel-off conditions.

Setting the level code

Level buttons set the device and number codes for the touch panel.
Joysticks use two level numbers. The first is for the X-axis and the second for the Y-
axis. You only need to specify the first level.
1. Press
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3. Press
Properties page.
4. Press
5. Enter a number 1 – 8. Each device can have from 1 – 8 levels except joysticks, where the range
is 1 – 7.
6. Press
34
in the Edit bar to open the
BUTTON
in the
PROPERTIES BUTTON
to open the
BUTTON TYPE
to open a keypad and set the device number.
DEV
to save the level device number, close the keypad, and return to the Button
ENTER
to open a keypad and set the level number assigned to the device.
NUM
to save, close the keypad, and return to the Button Properties page.
ENTER
BUTTON
menu.
BUTTON
menu to open the
PROPERTIES
menus. Choose a button type to open its
BUTTON TYPE
menu.
operation bar.
AXB-TPI/3 Touch Panel Interface 3