Programming
System Send_Commands (Cont.)
RESET
Clear panel
status (same as
power up).
Saved data is not
cleared.
SCAL
Set the
calibration
variables.
SETUP
Send panel to
Setup page.
SLEEP
Force the panel
into screen saver
mode.
TPAGEOFF
Turn Off page
tracking.
44
Syntax:
"'RESET'"
Example:
SEND COMMAND Panel,"'RESET'"
Resets the touch panel.
Syntax:
"'SCAL <X Multiplier> <X Offset> <Y Multiplier> <Y
Offset>'"
Example:
SEND COMMAND Panel,"'SCAL 2F 3A 2B 62'"
Sets the calibration values on the touch panel.
Syntax:
"'SETUP'"
Example:
SEND COMMAND Panel,"'SETUP'"
Sends the panel to the Setup Page.
Syntax:
"'SLEEP'"
Example:
SEND COMMAND Panel,"'SLEEP'"
Forces the panel into screen saver mode.
Syntax:
"'TPAGEOFF'"
Example:
SEND COMMAND Panel,"'TPAGEOFF'"
Turns Off page tracking.
AXB-TPI/3 Touch Panel Interface 3