HMS LOOP06 Manual Instruction page 12

EN
USER INSTRUCTiON
How to start
(1) Put LOOP WALK on flat and open area and make sure will be 2000*1000mm area in end of treadmill.
(2) Plug in, display is lighted
(3) Three steps to start up. Casual walking (distance between 2 feet is 5-100M) Put 1 foot on the Slow down area Display will show as below
pics.
The 1st step
(4) Make 2 steps to the front pant of device then it start to work .
Incorrect way to start up:
(1) Distance between 2 steps is smaller than 5CM or bigger than 10 CM.
(2) Too slow to start the LOOP walk .Time interval between 2 steps can not be longer than1.5seconds. LOOP Walk can not be started if steps
are continuously.
(3) Haven`t wake it when in sleep mode.
CAUTION: Children can not start LOOP walk due to their feet are too small to activate the body sensor system.
speed up
Walk/Run on the front part(near plastic cover),speed becomes faster and faster until it reaches the max speed 6km/h(8km/h with handle).
constant speed
Walk/Run on the middle part of running belt then keeps the constant speed.
slow down
Down in speed up area:
Slow down casually from jogging to fast walking and move to constant area, keep walking around 5 seconds than the speed comes
down
Slow down in constant area:
Slow down casually from fast walking to big steps walking and move to slow area keep on walking on slow down area around 5 seconds,
MINI WALK will slow down and stop automatically.
stop
How to stop from speed up area:
Slow casually from jogging to fast walking and move to constant speed area keep on walking around 5 seconds. Slow down
casually from fast walking to big steps walking and move to slow down area. Keep on walking in slow area around 5 seconds. Get
off from LOOP WALK when it is stopped.
CONSTANT SPEED
SPEED UP AREA
AREA
The 2nd step
SLOW DOWN AREA
The 3rd step