Panel Installation - Valor 738BVN Installation And Owner's Manual

12.1 Ceramic Panels Installation
1.
Remove the Firebox Baffl e by fi rst removing 2
screws on the front fl ange and lifting the Baffl e
towards you.
2.
Position the Rear Ceramic Panel onto the Rear Brick
Panel Rest. The Panel will sit on the lower ledge and
be fl at against the rear of the fi rebox.
f i r e - p a r t s . c o m
3. Slide the Left Ceramic Panel against the left side
of the fi rebox and up to the Rear Ceramic Panel.
The Panel will have to be angled to fi t inside the
fi rebox. Position the Right Ceramic Panel in the
same fashion.
4. Re-install the Firebox Baffl e fi tting the rear fl ange
above the Rear Brick Panel Rest and fastening 2
screws provided on the front edge.

Panel Installation

Rear Brick Panel Rest
17