Technical Data; General; Construction; Main Parts - Landustrie LANDY BTP62-40 Operation & Maintenance Manual

3. TECHNICAL DATA:

3.1 General:

The BTP pump is cast iron closed spiral vane impeller pump, designed to pump sewage and
other solids containing waste water with low energy consumption.
The impeller is designed in such a way that fibrous materials will not hook onto the edge but slide
along towards the impeller passage.

3.2 Construction:

 Two independent shaft seals, running in oil.
 Heavy duty bearings, greased for life.
 closed spiral vane impeller for low energy consumption.
 Vanes at the backside prevent solids entering the seal area and reducing the pressure on the
seal.

3.3 Main parts:

Landustrie version 06-14 | Operation & Maintenance manual BTP-SERIES
Subject to modifications
BTP with bearing unit
1 Pump casing
2 Impeller
3 Suction
4 Delivery
5 Bearing housing
6 Pump shaft
7 Seal pump side
8 Seal motor side
9 Bearings
10 Oil tank
11 Plug with gauge rod
12 Drain plug
13 Connection pressure
gauge
5 / 28