Table of Contents
Advertisement
2. SAFETY AND ENVIRONMENT:
2.1 General safety instructions
- Only trained and authorized staff may install, and maintain the pump
after carefully reading this manual.
- Only use the pump for its intended purpose and under the regulated
circumstances.
- Don't go near rotating parts.
- Clean the pump before maintenance and inspection.
- Observe the local regulations when working with aggressive, corrosive, toxic,
flammable and explosive chemicals.
- Never remove safety signs, keep them clean.
- Always connect to a grounded circuit.
- Before maintenance and inspection always disconnect the pump from the
mains.
- Use a proper hoist for lifting and handling the pump.
- Never drop the loose cable end in water.
2.2 Environment
Parts which will be replaced during repair, maintenance or renewal, could contain
materials which could be harmful to the environment.
Please be also aware that some of the components can be very useful for reuse.
The owner is responsible for careful disposal and processing of the materials.
Do this in according to the local environmental regulations.
2.3 Applied Symbols:
In this manual:
General warning
Danger!
Warning
Electrical hazard
Warning, agressive, corrossive,
toxic, flammable and explosive chemicals
Warning
rotating parts
On the pump:
Warning
Electrical hazard
Landustrie version 06-14 | Operation & Maintenance manual BTP-SERIES
Subject to modifications
Warning
No public access
Warning
Safety sign
Attention !
Inportant for correct use
Environment
Advice
Warning
rotating parts
Important advice
Information referral
Safety shoe/boots
and safety gloves
Recommended
EC-conformity symbol
4 / 28
Advertisement
Table of Contents
