Table of Contents
Advertisement
28/64
Assembly
Bosch Rexroth AG, MOBILEX GFB 8000 series 40 general operating instructions, RE 79039-01-B/01.2021
7.2 Installation conditions
The assembly conditions depend on the machine, the chassis frame or the
equipment frame where the planetary gearbox is integrated.
Make sure that the chassis or equipment frame, where the MOBILEX GFB 8000
planetary gearbox is attached to, is torsion resistant. The frame must be able to
withstand the weight and torque specified for the design.
During assembly, observe by all means the operating conditions that are
specified in appendix D "Technical data / Drawings" of the material number-
specific operating instructions.
Make sure that the work environment on site is free of dust and foreign
substances. The planetary gearbox must be installed free of contamination.
Contamination of the hydraulic fluid may considerably affect the function and
service life of the axial-piston motor, if supplied.
Use cloths made of lint-free fabric for cleaning.
Use mild detergents for removing lubricants and other heavy contaminations.
No detergents may penetrate into the hydraulic system.
7.3 Installation position
The standard installation position of the planetary gearbox is vertical (axial piston
motor on top).
The planetary gearbox installation position approved and recommended by
Rexroth is indicated on the drawing in appendix D "Technical data / Drawings"
of the material number-specific operating instructions.
Installation of the planetary gearbox in a non-approved Rexroth mounting
position!
Damage or failure of the planetary gearbox and expiry of the warranty!
Only install the planetary gearbox in an approved Rexroth mounting position
as indicated in the dimensioned drawing in appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
Damage to the planetary gearbox through misalignment with the machine frame!
Property damage!
Do not tilt the planetary gearbox during installation and insert it into the
machine frame torsion-free and tension-free.
Avoid misalignment of the planetary gearbox during installation.
Align the gearbox exactly with the connection of the customer (live ring).
7.3.1 Operation with axial-piston motor (if included in the scope of supply)
Strictly observe the instructions of the axial-piston motor operating
instructions. You will find these in appendix C "Mounting parts" in the material
number-specific operating instructions of the planetary gearbox.
NOTE
Advertisement
Table of Contents
