Bosch Rexroth 10 Series Instruction Manual page 17

General instructions on property damage and product damage | A10FZO/G, A10VZO/G
Danger from chemical or corrosive environmental conditions!
Product can be damaged! If the axial piston unit is exposed to chemical or
corrosive environmental conditions, such as sea water, fertilizer or road salt,
it can result in corrosion or, in extreme cases, malfunction. Leaks may lead to
leakage of hydraulic fluid.
▶ Take appropriate measures to protect the axial piston unit from chemical or
corrosive environmental conditions.
Leakage or spilling of hydraulic fluid!
Risk of environmental pollution and contamination of ground water!
▶ Always place a drip tray under the axial piston unit when filling and draining
hydraulic fluid.
▶ Use a suitable binding agent to collect any leaked hydraulic fluid.
▶ Observe the parameters in the safety data sheet for the hydraulic fluid and the
specifications provided by the machine/system manufacturer.
Danger from hot components!
Nearby products can be damaged! Components which heat up (e.g., solenoids)
can cause damage to nearby products if they are too close during installation.
▶ When installing the axial piston unit, check the safety distances to nearby
products to ensure that they are not damaged.
The warranty only applies to the machine configuration as delivered.
The warranty will be voided if the product is incorrectly installed, commissioned or
operated, or if it is used or handled improperly.
NOTICE
RE 91485-01-B/2021-11-18, Bosch Rexroth AG
17/72