Table of Contents
Advertisement
• Storage areas should be dry.
Recommended relative humidity ≤ 60%.
• Ideal bearing temperature: +5 °C to +20 °C.
• Minimum storage temperature: −50 °C.
• Maximum storage temperature: +60 °C.
• Keep out of direct sunlight.
• Do not stack axial piston units and store them in a shock-proof manner.
• Do not store the axial piston unit on the drive shaft or assembled parts,
e.g. sensors or valves.
• For further storage conditions, see Tabelle 14.
▶ Check the axial piston unit monthly to ensure professional storage.
After delivery
The axial piston units come in corrosion protection packaging
(corrosion protection film) provided at the factory.
Tabelle 14 lists the maximum permissible storage times for an unpackaged
axial piston unit as per data sheet 90312.
Tabelle 14: Storage at the factory corrosion protection
Storage conditions
Closed, dry room, uniform
temperature between +5 °C and
+20 °C. Undamaged and closed
corrosion protection film.
The warranty will be voided if the requirements and storage conditions are not
observed or after expiration of the max. storage time (see Tabelle 14).
How to proceed once the max. storage time elapses:
1� Check the entire axial piston unit for damage and corrosion prior to
installation.
2� Perform a test run to check the axial piston unit for proper functioning and
leak-tightness.
3� If storage time exceeds 24 months, replace the shaft seal.
Once the max. storage time has elapsed, we recommend that you have the
axial piston unit inspected by your Bosch Rexroth service partner.
For questions regarding repair and spare parts, contact your proper Bosch Rexroth
service partner or the service department of the manufacturer's plant of the
axial piston unit, see chapter 10.5 "Spare parts" on page 60.
After removal
An uninstalled axial piston unit must be preserved with corrosion protection for
the duration of storage.
Transport and storage | A10FZO/G, A10VZO/G
Standard corrosion
protection
Maximum 12 months
RE 91485-01-B/2021-11-18, Bosch Rexroth AG
29/72
Long-term corrosion
protection (optional)
Maximum 24 months
Advertisement
Table of Contents
