Table of Contents
Advertisement
Problem
You cannot open
the door with the
sensor.
The sensors do not
respond.
Possible cause and remedy
You have selected the
The sensor does not respond when the oven is
switched off.
As soon as the oven is switched on, the sensors will
respond. If you want the sensors to respond even
when the oven is switched off, select the
|
QuickTouch
On
The oven is not connected to the power supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been switched
to on.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
If you need to open the door, for instance because
there is still food in the oven compartment, use the
opener supplied to prise the door open. To do so, push
the opener at an angle into the gap on the outside
edge of the door at the top between the control panel
and the door. You can also pull the door open by
grasping the sides of the door with both hands and
pulling carefully until it opens.
You have selected the
When the oven is switched off, the sensors do not respond.
As soon as the oven is switched on, the sensors will
respond. If you want the sensors to respond even
when the oven is switched off, select the
|
QuickTouch
On
The oven is not connected to the electricity supply.
Make sure that the plug is correctly inserted in the
socket and that the socket is switched on.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
There is a fault with the control unit.
Touch and hold the On/Off sensor until the display
switches off and the oven restarts.
Problem solving guide
Display
|
QuickTouch
setting.
|
Display
QuickTouch
setting.
|
Off
setting.
Display
|
|
setting.
Off
Display
|
87
Advertisement
Table of Contents
