Miele@Home - Miele H 7440 BMX Operating And Installation Instructions

Settings
System lock 
The system lock prevents the oven
being switched on by mistake.
The minute minder and the MobileStart
function can still be used when the
system lock is active.
The system lock will remain activated
even after a power failure.
- On
The system lock is switched on.
Before you can use the oven, touch
the OK sensor for at least 6 seconds.
- Off
The system lock is deactivated. You
can use the oven as normal.

Miele@home

The oven is a Miele@home compatible
appliance. Your oven is fitted ex-works
with a Wi-Fi communication module
and is suitable for wireless
communication.
There are a number of ways of
connecting your oven to your Wi-Fi
network. We recommend connecting
your oven to your Wi-Fi network with
the help of the Miele App or via WPS.
- Activate
This setting is only visible if
Miele@home is deactivated. The Wi-
Fi function is reactivated.
-
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the Wi-
Fi function is switched off.
- Connection status
This setting is only visible if
Miele@home is activated. The display
38
shows information such as the Wi-Fi
reception quality, network name and
IP address.
- Set up again
This setting is only visible if a Wi-Fi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
- Reset
This setting is only visible if a Wi-Fi
network has already been set up. The
Wi-Fi function is deactivated and the
Wi-Fi network will be reset to the
factory default. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.
The network settings should be reset
whenever the oven is being disposed
of or sold, or if a used oven is being
put into operation. This is the only
way to ensure that all personal data
has been removed and, in the case of
the latter, the previous owner will no
longer be able to access the oven.
-
Set up
This setting is only visible if no
connection to the Wi-Fi network has
been set up yet. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.