Labomed eVO 300 User Manual page 24

GUIDANCE TABLES (continued)
Table 206 – Recommended Separation Distances between
Portable and Mobile RF Communications Equipment and the
ME Equipment and ME Systems that are NOT Life-supporting.
Guidance and Manufacturer's Declaration - Electromagnetic Immunity
Portable and Mobile RF Communications Equipment and the
The eVO 300 is intended for use in the electromagnetic environment in which radiated RF
disturbance are controlled. The customer or user of the eVO 300 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF Communications Equipment (transmitters) and the eVO 300 as recommended
below, according to the maximum output power of the communications equipment.
Max Output Pow-
er of Transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d)
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (w) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects, and people.
24
8126200-795
Recommended Separation Distances between
Separation (m)
150kHz to 80 MHz
d=(3.5/v1)(Sqrt P)
0.1166
0.3689
1.1666
3.6893
11.6666
eVO 300
Separation (m)
80 to 800 MHz
d=(3.5/E1)(Sqrt P)
0.1166
0.3689
1.1666
3.6893
11.6666
eVO 300
for
eVO 300
eVO 300
Separation (m)
800MHz to 2.5GHz
d=(7/E1)(Sqrt P)
0.2333
0.7378
2.3333
7.3786
23.3333
Issue 1.1
Printed on April,2016