Changing To Silent Operation; Turning On Active Noise Cancellation - Tait TP9500 User Manual

Changing to Silent Operation

When silent operation is on, all the radio's audible tones are turned off, and only channel traffic can be heard.
To turn silent operation on or off:
1. Press Menu and select Radio settings > Alert settings > Silent operation.
2. In the Silent operation menu, scroll to either On or Off and press Select.
Depending on how your radio is programmed, you may be able to press a function key to toggle silent
operation on and off.
While silent operation is on, the

Turning On Active Noise Cancellation

Active noise cancellation uses a secondary microphone on the back of the radio to actively filter out noise in loud
environments, making it easier for recipients to discern the speech of the talking party who is in a noisy environment.
Active noise cancellation can be left on regardless of environment. However, when safety features such as Lone-
worker Monitoring or Radio Monitor are activated, the listener may lose awareness of the noisy environment. Tait
recommends users implement supplementary procedures to account for this.
The complementary feature of microphone sensitivity allows the internal and external microphones to be configured to
suit the type of environment the user is in, further improving audio quality. When active noise cancellation is enabled,
sensitivity should be decreased. In a quiet environment, increasing the sensitivity is suggested.
For best results, Tait recommends holding the radio 2.5 - 5 cm (1 - 2 inches) from the mouth and speaking directly into
the radio speaker/mic.
To turn active noise cancellation on or off:
1. Press Menu and select Radio settings > Functions > Noise cancellation.
104
Tait International Ltd December 2019
icon appears in the display.