Health risk! Always use protective equipment (gloves, face mask) when handling
bleach.
5. If the dishwashing liquid solution is ineffective, use a solution of one part household bleach to two parts
clean water, on a cloth, to wipe away remaining dirt.
Cleaning the Contacts of the Battery
Do not scratch or scrape the contacts of the battery. If necessary, wipe the contacts of the bat-
Notice
tery with a dry, lint-free cloth to remove any dirt, oil or grease.
Changing the Radio ID
The radio ID can be changed if the current ID is not correct.
To change the radio ID your radio must have alphanumeric keys.
1. Press Menu and select Radio settings > Radio info > Radio ID.
2. Press the right selection key.
3. If Enter PIN appears in the display, enter the correct sequence of keys (known as the technician access
PIN).
4. Press Clear to delete the current ID, and use a combination of the scroll keys and alphanumeric keys to
enter a new ID.
5. Press Options > Store to save the new ID.
Running Diagnostic Tests
Diagnostics tests are available via the main menu.
This feature is controlled by a software license (SFE) and may not be available with your radio.
1. Press Menu and select Diagnostics.
2. Scroll to the name of the required test and press Select.
The following table lists diagnostics tests may be available on your radio.
The radio may transmit when you select some tests. Make sure you have a suitable load or
Notice
antenna connected before running diagnostics tests.
116
Tait International Ltd December 2019