Using Monitor And Squelch Override (On Analog Channels) - Tait TP9500 User Manual

Using a function key to end all active calls
• Press the function key programmed for call cleardown and monitor is turned off for all radios in the radio group.
The LED stops flashing green, and the monitor icon disappears from the display.
Using the function key programmed for reset monitor/call cleardown to end active calls
The function key programmed for reset monitor may be programmed so that a short key press ends the current call,
and a long key press ends all active calls in the group.

Using Monitor and Squelch Override (on Analog Channels)

The monitor function allows users to override some or all of the radio's mutes, and hear if there is any traffic on a chan-
nel before they make a call.
The squelch override function lets the radio user override the squelch (carrier) mute and hear all noise on a channel,
including weak signals that are below the programmed squelch threshold.
To turn monitor on and off:
1. Press Menu and select Radio settings > Functions > Monitor.
2. Scroll to On (or Off) and press Select.
While monitor is on, the LED slowly flashes green and the monitor icon appears in the display.
The radio may be programmed so that monitor turns off automatically after a short time.
To turn squelch on and off:
1. Press Menu and select Radio settings > Functions > Squelch o'ride.
Squelch is often programmed as a long keypress of the same function key that turns monitor on and
off.
2. Scroll to On (or Off) and press Select.
This allows even faint and noisy signals to be heard. While squelch override is on, the LED flashes green, and
the squelch override icon appears on the display.
Press the monitor function key again to return the radio to a quiet state.
Squelch cannot be overridden when the radio is scanning.
65
Tait International Ltd December 2019