Selecting a Zone
The radio may be programmed to use zones, which are collections of channels and groups. When a zone is selected,
only the channels and groups assigned to that zone are available.
Using the Main menu:
1. Press Menu and select Zones.
Depending on how the radio is programmed, scroll keys or left selection keys may be used to select
the Zones menu.
2. In the Zones menu, scroll through the list of zones until the desired one appears.
3. Press Select, and the zone indication appears either below the channel information, beside the
RSSI icon, or in both positions. These can also be set to not be displayed.
Other ways of selecting a zone
The following controls may also be used to select a zone:
• 3-way selector (see About the Radio Controls)
If the 3-way selector is turned while pressing the PTT key, the zone will change after the PTT key is
released.
• left selection key (see Using the left selection key Quick Access menu)
• scroll keys (see Using the scroll key Quick Access menu)
44
Tait International Ltd December 2019