Re-Establishing A Call - Tait TP9500 User Manual

Dmr portable radio

Hide thumbs Also See for TP9500:

Manual (14 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

Table of Contents

• automatically accept the call. The

beep or ring. In this case, the caller will usually talk first.

• ring like a telephone. Press Answer to accept the call. The radio gives a beep and the

the display. You may also be able to accept the call if you press the PTT key. In this case, you will usually talk

first.

Once the

icon appears, you can proceed with the call, as follows:

1. Hold the microphone about 2 inches (5cm) from your mouth.

2. Press and hold the PTT key to transmit.

3. Speak clearly into the microphone and release the PTT key when you have finished talking.

While you are transmitting, the LED glows red and

End the call by pressing End. The network may also end the call if neither you nor the other party transmits for a pre-

determined time or if your call time limit is exceeded.

Transmit timer

Your radio may have a transmit timer that limits the amount of time you can transmit continuously.

When the transmit timer is about to expire, the message Transmit timeout imminent appears in the display, the

LED flashes red, and the radio gives three beeps.

If the transmit timer times out, the call clears down.

Call time limit

In trunked mode, the length of your call may be limited by the network or by your radio. Your radio may be pro-

grammed to display the time remaining for your call.