Ending Active Calls - Tait TP9500 User Manual

Using the Main Menu
1. Press Menu and select Radio settings > Functions > Low power tx.
2. Scroll to On (or Off) and press Select.
The current setting is highlighted.
The message Low power tx activated (or deactivated) appears on the display.
Using a function key
1. Press the function key programmed for low-power transmit to transmit at low power on your current chan-
nel and any channels subsequently used.
The message Low power tx activated appears briefly, and the low-power transmit icon a ppears on the dis-
play.
2. Press the low-power transmit function key again to turn low-power transmit off, and the message Low
power tx deactivated appears on the display.

Ending Active Calls

For analog channels, a function key may be programmed to either end the current call, or end the current call and all
other active calls in your group. This can be done either by:
• using the function key programmed for reset monitor to end the current call,
• using the function key programmed for call cleardown to end the current call and all other calls in the group, or
• using the function key programmed for both reset monitor and call cleardown.
Using a function key to end your current call
• Press the function key programmed for reset monitor. The radio's monitor is turned off, ending the current call.
The LED stops flashing green, and the monitor icon disappears from the display.
64
Tait International Ltd December 2019