Wearing The Headset; Pairing And Disconnecting A Wireless Headset With The Radio - Tait TP9500 User Manual

Dmr portable radio
Hide thumbs Also See for TP9500:
Table of Contents

Advertisement

 •  is compatible with the Bluetooth Specification Version 2.0 or higher. Tait recommends Bluetooth Specification 
Version 2.1 or higher.
 •  Includes Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile (HFP) 
version 1.5 or 1.6.

Wearing the Headset

Headsets come as an over-the-head accessory, or as a remote speaker microphone.
With a headset worn over the head, place it on the ear. Depending on which ear the headset will be worn, simply 
adjust the ear hook accordingly.
To get the best performance from the headset:
1. Do not block the device's internal antenna (see the device's user documentation). The human body can 
interfere with a Bluetooth signal.
2. If the radio is used with the right hand, wear the over-the-head headset on the right ear.
3. Avoid coming in contact with the internal antenna of a headset or radio.
4. When using a remote speaker microphone with active noise cancellation turned on, the RSM should be 
turned toward the mouth when speaking.

Pairing and disconnecting a wireless headset with the radio

Before attempting to connect a wireless headset, Tait recommends that the headset is fully charged. 
Refer to the headset installation instructions for charging instructions.
Pairing creates a unique and encrypted wireless link between the Bluetooth-capable radio, and the Bluetooth headset. 
To use a headset with a radio, the devices must first be paired.
When connecting to a wireless headset for the first time, instruct the radio to search for compatible headsets using 
Bluetooth wireless technology. The search should take less than one minute.
To pair a wireless headset with the radio:
1. Turn on the radio.
2. Put the wireless headset into pairing mode. 
3. Press Menu and select Wireless headset > Find new devices.
The New devices menu opens, and while the radio searches for the new device, the message 
Searching ... appears.
4. Select Connect when the required accessory appears in the list of new devices, then Yes to add the 
headset to My Headsets.
35
Tait International Ltd December 2019

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents