Placing The Radio In Do-Not-Disturb Mode; Switching To Conventional Channels Or Conventional Groups - Tait TP9500 User Manual

If the user decides to cancel out of editing a text message or receive a call while editing, the current
draft will be saved and is available for editing later.
Receiving a text message
If the radio is programmed for call queuing, incoming text messages are added to the queue. For more information,
see Checking the Queue.
Press Options and select whether to reply, call or delete.
The radio may be programmed to automatically view text messages on receipt.
If the radio is not programmed for call queuing, incoming text messages will not be stored or displayed.

Placing the Radio in Do-Not-Disturb Mode

If a user doesn't want to accept calls for a while, they can place the radio in 'do-not-disturb mode', so that incoming
calls can be ignored. Users can still make outgoing calls in the usual way.
While do-not-disturb mode is active, incoming calls cannot be stored in the call queue.
Using a function key
1. Press the function key programmed for do not disturb, to activate the do-not-disturb function.
The message Do not disturb activated appears on the display. The radio will now ignore all incoming calls.
2. To deactivate the do-not-disturb function, press the do-not-disturb function key again.
The message Do not disturb deactivated appears on the display.
Using the Main menu
1. Press Menu and select Radio Settings > Call Settings > Do not disturb.
2. In the Do not disturb menu, choose On.
3. Press Select.
The message Do not disturb activated appears on the display. The radio will now ignore all incoming calls.

Switching to Conventional Channels or Conventional Groups

You may be able to dial conventional channels or groups, using 101 to 110. The channels or groups called using these
numbers are programmed for your radio.
Only valid for MPT1327, MPT1343 and Nokia ANN dialing schemes. Does not apply to DMR.
Notice
84
Tait International Ltd December 2019