Download Print this page
Saxby Lighting EL-20079 Instruction Leaflet

Saxby Lighting EL-20079 Instruction Leaflet

Orkney recessed kit

Advertisement

Quick Links

Commissioning
When all the LED units are secured in place, plug in your
transformer and switch on.
Care and Cleaning
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
To prolong the life and keep your outdoor lighting in good
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Safety information
Live Voltages may be present in the transformer even when turned off or when completely disconnected.
For your safety, always switch off the supply before maintaining the system.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be
scrapped.
www.saxbylighting.com
condition, it is recommended that periodically it is cleaned
using a soft cloth followed by the application of a light
coating of oil, such as WD40.
Do not clean the units with a pressure washer.
Iss.3 12082015
Saxby Lighting. LS9 0SE
Instruction leaflet
Orkney Recessed Kit
EL-20079, EL-20080

Advertisement

loading
Need help?

Need help?

Do you have a question about the EL-20079 and is the answer not in the manual?

Questions and answers

Summary of Contents for Saxby Lighting EL-20079

  • Page 1 Live Voltages may be present in the transformer even when turned off or when completely disconnected. For your safety, always switch off the supply before maintaining the system. This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped. Iss.3 12082015 www.saxbylighting.com Saxby Lighting. LS9 0SE...
  • Page 2 Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory Installation operation of this product. Please retain these instructions for future reference. Position the transformer next to the desired (indoor /dry) Connect the individual light units to the cable run using the terminal connectors supplied- to determine the limits of the socket location –...

This manual is also suitable for:

El-20080