Advertisement
Quick Links
Wiring
•
Having correctly identified the wiring from your existing light fitting, pull the mains wire through the hole and
connect to the quick fit connection block in the following way.
Check that...
•
You have correctly identified the wires.
•
The connections are tight.
•
No loose strands have been left out of the connection block.
Care and Safety
•
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could
damage the finish.
•
For your safety, always switch off the supply before cleaning.
WWW.saxbylighting.com
Instruction leaflet
Reeve Connect Batten
75531, 75532, 75533, 75534
Iss .2 13/09/2018
Saxby lighting. BH23 3PE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Saxby Lighting Reeve Connect Batten Series
Summary of Contents for Saxby Lighting Reeve Connect Batten Series
- Page 1 We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish. • For your safety, always switch off the supply before cleaning. Iss .2 13/09/2018 WWW.saxbylighting.com Saxby lighting. BH23 3PE...
-
Page 2: Technical Data
Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set of wires.
Need help?
Do you have a question about the Reeve Connect Batten Series and is the answer not in the manual?
Questions and answers