Saxby Lighting Eco Manual

Commisioning
7. Push the product into place in the housing ensuring that you do not trap the cable.
Secure in position.
8. This product comes with two wall covers, a plain and slotted, that can be fitted.
9. Locate the seal and glass in position. refit the desired cover, and replace screws. See Fig.
2.
10. Replace fuse or circuit breaker and switch on. Your light is now ready for use.
Fitting / Replacing Bulbs
When changing a bulb, always switch off at the mains and
allow the bulb to cool before handling. Dispose of used bulbs
carefully.
Do not exceed the wattage stated or use a different shape
bulb from that indicated on the fitting.
Care and Cleaning
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Glass parts - Remove and wash in warm water or just use a damp cloth. Do not use abrasive
materials as these will damage the finish.
Recycling Advice
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Safety Information
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part
should be scrapped.
Saxby Lighting Ltd. BH23 3PE
40W ES GLS
9W ES Energy Saver
Iss.3 23072015
Eco
OL60AB