Saxby Lighting Tribeca Wall Instruction Leaflet

Download this manual

Commissioning

• Refit the product to the fixing bracket. Make sure the

product is correctly oriented as shown in the diagram on

the right.

• Tighten the screws to secure.

Fitting/replacing bulbs

• The LED's in this product are non replaceable.

We recommend cleaning with a soft dry cloth.

Do not use solvents or abrasive cleaners as these could

damage the finish.

Recycling advice

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer for recycling advice.

Safety information

For your safety, always switch off the supply before changing lightbulbs, or cleaning.

www.saxbylighting.com

• Replace fuse or circuit breaker and switch on. Your light

is now ready for use.

Iss.2 03092015

Saxby Lighting Ltd. LS9 0SE

Instruction leaflet

Tribeca Wall

EL-40074

Need help?

Do you have a question about the Tribeca Wall and is the answer not in the manual?

Page 1 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Safety information For your safety, always switch off the supply before changing lightbulbs, or cleaning. Iss.2 03092015 www.saxbylighting.com Saxby Lighting Ltd. LS9 0SE...
Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before supplied Ensure the wall is capable of holding the installation of a new product. Before removing the existing weight of the product. Take care to avoid damaging any fitting, carefully note the position of each set of wires. concealed wiring and pipes. The correct fixings should Warning be used for brick or cavity walls.

El-40074