hygena Valencia 656/5776 Assembly Instructions Manual

500mm base cabinet

Hide thumbs

page of 52

/ 52
Bookmarks

Quick Links

Download this manual

Valencia -

Assembly Instructions -

hygena

Dimensions

Width - 50cm

Depth - 59cm

Height - 87cm

Important -

Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

500mm Base Cabinet

Please keep for future reference

Cabinet

Black Door Pack

Cream Door Pack

Oak Door Pack

White Gloss Door Pack

White HN Door Pack

656/5776

633/2882

633/2710

205/4009

633/2806

192/3722

MADE IN

BRITAIN

Issue 2 - 31/07/14

Need help?

Do you have a question about the Valencia 656/5776 and is the answer not in the manual?

Questions and answers

Summary of Contents for hygena Valencia 656/5776

Page 1 Valencia - 500mm Base Cabinet Assembly Instructions - Please keep for future reference Cabinet 656/5776 hygena Black Door Pack 633/2882 Cream Door Pack 633/2710 Oak Door Pack 205/4009 White Gloss Door Pack 633/2806 White HN Door Pack 192/3722 Dimensions Width - 50cm...
Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 16.5kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Base (DPF074A) (469 x 494mm) Left Side Right Side (DPF068A) (DPF069A) (720 x 560mm) (720 x 560mm)
Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 If you would If you would Choose which way like your door like your door you would like the to open this to open this door to open...
Page 6 Assembly Instructions Step 3 Prepare the right side Refer to step 1 and, if required, fit 2 hinge plates onto the right side , making sure 150mm that the slot is facing towards the front edge. Screw 4 metal dowels into the holes shown on the right side Fit a bracket...
Page 7 Assembly Instructions Step 5 Fit the legs to the base Push the leg sockets into the holes in the base as shown. Secure each leg socket with 3 screws Tap in the centre plug on each leg socket Push the leg into the leg socket Step 6...
Page 8 Assembly Instructions Step 8 Fit the 2 cross rails Push each cross rail onto the right side Support this cross rail until the left side has been Use a screwdriver to fitted in the next step. tighten the large locking fitted to each cross rail Note: Turn the large...
Page 9 Assembly Instructions Step 10 Fit the back Slide the back along the grooves in the side panels Step 11 Secure the back The bottom edge of the back must be flush with the bottom edge of the base Secure the back the back edge of the base using 3 screws...
Page 10 Assembly Instructions Step 12 Warning: Take care when Secure the unit to the drilling the wall wall that you do not drill into any pipes, wires Using the brackets etc. If in doubt, consult fitted to the back edge of an expert.
Page 11 Assembly Instructions Step 14 Fit the loose shelf Insert 4 shelf studs the required height. Lower the loose shelf down onto the shelf studs Step 15 Fit the unit to worktop To fit the unit to the worktop use 2 screws to screw up through the holes in the cross rail as shown.
Page 12 Assembly Instructions Step 17 PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO CHOOSE WHICH 2 HOLES YOU WILL NEED TO DRILL Drill the handle holes in the door Important: Please follow Drill these 2 holes if ONLY drill these instructions you have fitted the carefully.
Page 13 Assembly Instructions Step 18 Fit door and handle 2 people are needed Push and here click Note: The easiest way to attach the door is to fit the top hinge first, then align and fit the other hinge. Push Push the hooks on the hinge arm underneath the front of the hinge plate...
Page 14 Assembly Instructions Step 19 Adjust the door if needed Height adjustment. Loosen screws A on hinge plates and move door up or down as required. Retighten screw A. Forward and Back adjustment. Loosen screw B on hinge arm and move door in or out as required.
Page 15 Assembly Instructions Step 20 Fit the hinge covers Push the hinge covers onto the hinge arms Step 21 Fit the plinth After cutting the plinth to the required length, offer the plinth up to the unit Black Plinth Pack 608/2345 and using a pencil, mark the position of the unit’s Cream Plinth Pack...
Page 16 Assembly Instructions Step 22 Fit other products to the unit To fit other products to this unit e.g. worktops etc., please follow the instructions packed with them. We recommend that you consult a qualified joiner or kitchen fitter. Assembly is complete Warning: The unit is heavy.
Page 17 Valencia - 4 Drawer Cabinet Assembly Instructions - Please keep for future reference Cabinet 656/5848 hygena Black Drawer Pack 633/2909 Cream Drawer Pack 633/2734 Oak Drawer Pack 205/4528 White Gloss Drawer Pack 633/2820 White HN Drawer Pack 204/6718 Dimensions Width - 50cm...
Page 18 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 16.5kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 19 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Base (DPF074A) (469 x 494mm) Left Side Right Side (DPF087A) (DPF088A) (720 x 560mm) (720 x 560mm)
Page 20 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 21 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Fit the left runners to the left side Fit the 4 left runners marked ‘L’ to the left side The 1st screw uses...
Page 22 Assembly Instructions Step 3 Prepare the left side Screw 4 metal dowels into the holes shown on the left side Note: Tighten metal dowels up fully against the panels. Fit a bracket flush to 150mm the top edge of the left side , about 150mm in from the groove, see...
Page 23 Assembly Instructions Step 5 Fit soft close units to the right side Fit the 4 right soft close units marked ‘R’ to the right side using 3 screws Step 6 Prepare the right side Screw 4 metal dowels into the holes shown on the right side Fit a bracket flush to...
Page 24 Assembly Instructions Step 7 Prepare the base Insert 4 large locking nuts into the base as shown. Note: Arrow on locking nut must point towards hole in edge of panel. Tap 6 wooden dowels into the base shown. Note: Wooden dowels must not stick out from the edge by more than 10mm or they may...
Page 25 Assembly Instructions Step 9 Join the right side and base Push the base onto the right side Use a screwdriver to tighten the 2 large locking nuts fitted to the base Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
Page 26 Assembly Instructions Step 11 Fit the 2 cross rails Push each cross rail onto the right side Use a screwdriver to tighten the large locking fitted to each cross rail Support this cross rail until the left side has been Note: Turn the large fitted in the next step.
Page 27 Assembly Instructions Step 13 Fit the back Slide the back along the grooves in the side panels Step 14 Secure the back The bottom edge of the back must be flush with the bottom edge of the base Secure the back the back edge of the base using 3 screws...
Page 28 Assembly Instructions Step 15 Warning: Take care when Secure the unit to the drilling the wall wall that you do not drill into any pipes, wires Using the brackets etc. If in doubt, consult fitted to the back edge of an expert.
Page 29 Assembly Instructions Step 17 Fit the unit to worktop To fit the unit to the worktop use 2 screws to screw up through the holes in the cross rail as shown. Then use 2 screws screw up through the brackets as shown.
Page 30 Assembly Instructions Wheel on Step 19 outside surface Prepare the drawers Fit the left drawer side and right side drawer side onto the drawer Wheel on front using 4 screws outside into the slotted holes. surface Top of Important: Make sure drawer that the drawer sides front...
Page 31 Assembly Instructions Step 22 Fit the soft close catches Position the location hole of the right soft close catch marked ‘R’ into the 3rd hole up from the front of the right drawer side then secure Location using 3 screws hole Position the location hole of the left soft close...
Page 32 Assembly Instructions Step 24 Prepare the soft close units Before fitting the drawers you will need to push the movable part of the 8 soft close units forward until it clicks into place. Step 25 Fit the drawers Slide the wheels on the drawer sides over the wheels on the runners...
Page 33 Assembly Instructions Step 26 Black Plinth Pack 608/2345 Cream Plinth Pack 608/2369 Fit the plinth Oak Plinth Pack 205/5668 After cutting the plinth to White Gloss Plinth Pack 608/2352 the required length, offer the plinth up to the unit White HN Plinth Pack 198/9917 and using a pencil, mark the position of the unit’s...
Page 36 ALR2654...
Page 37 Valencia - Under Oven Cabinet Assembly Instructions - Please keep for future reference Cabinet 656/5831 hygena Black Door Pack 656/6720 Cream Door Pack 656/6744 Oak Door Pack 205/4281 White Gloss Door Pack 656/6737 White HN Door Pack 203/8104 Dimensions Width - 60cm...
Page 38 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 16.5kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 39 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Base (DPF068A) (DPF069A) (DPF078A) (720 x 560mm) (720 x 560mm) (569 x 494mm) 5 Support Rail...
Page 40 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 41 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Only screw ONE metal dowel into one of these holes. Prepare the left side Screw a metal dowel into one of the holes shown on the left side Note: Tighten metal...
Page 42 Assembly Instructions Step 3 Prepare the right side Only screw ONE metal dowel into one of these holes (use Screw a metal dowel the same hole that you used into one of the holes for the left side in step 1). shown on the right side Use the same hole that you used for the left side...
Page 43 Assembly Instructions Step 5 Prepare the base Insert 4 large locking nuts into the base as shown. Note: Arrow on locking nut must point towards hole in edge of panel. Tap 6 wooden dowels into the base shown. Note: Wooden dowels must not stick out from the edge by more than 10mm or they may...
Page 44 Assembly Instructions Step 7 Join the right side and base Push the base onto the right side Use a screwdriver to tighten the 2 large locking nuts fitted to the base Note: Turn the large locking nuts as far as they will go - more than Finished 1/2 a turn.
Page 45 Assembly Instructions Step 10 Fit the left side Push the left side onto the assembly. Use a screwdriver to tighten the large locking fitted to the 2 cross rails and the 2 fitted to the base Note: Turn the large locking nuts as far as they will go - more than...
Page 46 Assembly Instructions Step 13 Fit 2 support rails Fit a support rail flush with the support rail on the right side using 2 screws Fit a support rail flush with the support rail on the left side using 2 screws Step 14 Warning: Take care when...
Page 47 Assembly Instructions Step 15 Joining units together Fittings have been supplied so you are able to join units together. Make sure that your first unit is level. Push the other unit up against first unit and ensure both units are level.
Page 48 Assembly Instructions Step 17 Fit the appliance fascia Offer the appliance fascia up to the unit, so that it is flush with the bottom and sides of the unit. Use 2 screws screw through the brackets fitted to the support rails and into the back surface of the appliance fascia...
Page 49 Assembly Instructions Step 19 Install the oven Please refer to the instructions that were supplied with the oven. We recommend that you contact a registered installer. Step 20 Fit other products to the unit To fit other products to this unit e.g. worktops etc., please follow the instructions packed with them.
Page 52 ALR2659...

This manual is also suitable for:

Valencia 633/2882 Valencia 633/2710 Valencia 205/4009 Valencia 633/2806 Valencia 192/3722 656/5831