HP 8712C User Manual page 214

Using Instrument Functions
Printing and Plotting Measurement Results
N O T E
The following table provides some typical print times for various HP printers. These values are typical
only; they are not intended to necessarily represent the print times you will experience, They are
provided for comparison only In addition, the number of measurement points, measurement trace
complexity, number of traces, user graphics, continuous sweep, and print size and format are among
the many parameters that can have an affect on your particular print time.
portrait Format (minzwc)
870
300
100
300
N / A
1 Some Da&Jets may not support 100 dpi resolution. If your plot is 213 size, use 150 dpi.
2 These times were measured with the HP DeskJet 12OOC in "paper-fast" moda
3 Do not use a color cartridge for mono print on single cartridge DeskJets.
4 Print width set to 181 mm to more closely match the size of PC1 landscape print.
4 - 9 6
Table 4-2. Typical Print Times
N I A
N I A
N I A
Landaoapo Format (minrac]
870
N / A
N I A
NIA
NIA
NIA