HP 8712C User Manual page 122

Using Instrument Functions
Using Markers
If a marker is on, two or three lines of numbers follow the marker annotation:
The examples in this section are shown with a transmission response
measurement of a flter. 'lb follow along with these examples, use the filter
that was shipped with your analyzer, connect the equipment as shown, and
set up the analyzer by pressing the keys shown below the equipment setup.
Figure 4-2. Connect the Filter to the Analyzer Figure 4-2. Connect the Filter to the Analyzer
4-4
Cartesian Polar Smith Chart
frequency frequency frequency
response magnitude resistive velue
phase reactive value
N E T W O R K A N A L Y Z E R
FILTER RF
IN