HP 8712C User Manual page 301

Automating Measurements
Operator Interaction
This feature requires the IBASIC option (lC2). User BEGIN adds the following
capabilities:
l
Save or Recall.
l
l
example, a gain compression implementation.
Redefine softkeys to implement application support.
l
The feature is designed to provide the fastest possible sweep speeds while
taking advantage of the flexibility provided by IBASIC. This is the simplest
way for recalling instrument states or conliguring most used softkey functions
under a single softkey menu. The [BEGIN] menu softkey #8 provides access to
the menus below. Toggle softkey 8 to enable/disable @iZiQ or I&W H#fN .
You cannot redefme softkey 8.
Amplifier
Filter
Broadband Passive
Mixer
Cable [Option 100 only1
U s e r B E G I N o n O F F
7-22
User label 1
User label 2
User label 3
User label 4
User label 5
User label 6
User label 7
- - - - >
User BEGIN ON off