Hdmi; Hdmi Resolution; Hdmi Audio; Multiple Display - Advantech RSB-4710 User Manual

3.7

HDMI

3.7.1

HDMI Resolution

Open Settings->Display->HDMI->HDMI Resolution
3.7.2

HDMI Audio

If the HDMI monitor supports audio, the default output will be both HDMI and the
onboard audio codec.
3.8

Multiple Display

RSB-4710 supports four display ports: eDP, LVDS (MIPI-to-LVDS), HDMI, and DP
(DP-to-HDMI). However, only two ports can be used simultaneously.
Default Display Support:
Port
EDP
LVDS
HDMI
DP
Notes:
1. The name of the panel must begin with "edp-", "lvds-" , "hdmi-" or "dp-".
They can be found in "kernel/include/dt-bindings/display/screen-timing/{LCDNAME}.dtsi"
For example,
lvds_g070vw01: lvds-g070vw01
2. If no changes to the configuration have been made, the default setting will be in effect.
HDMI-default and DP-default are the default settings.
3. Check the configuration via the terminal or debug console.
cat /proc/cmdline
... prmry_screen=hdmi-default extend_screen=dp-default
RSB-4710 User Manual
RSB-4710
EDP-1920x1080
EDP-1366x768
LVDS-g070vw01
LVDS-g150xgel05
LVDS-g215hvn01
HDMI-default
DP-default
44