Data And Ce Marking - Wega ALE Use And Maintenance Manual

2.8 Data and marking
The machine's general technical data is provided in the fol-
lowing table:
TECHNICAL DATA TABLE
120 V
Power
220-240 V
380-415 V
Frequency
Heating unit
Safety valve calibration
Heating unit operating pressure
Mains water pressure
Coffee dispensing pressure
Working environment temperature
Sound pressure level
In compliance with directive 2006/42/CE, the machine is
marked with the CE code with which the manufacturer de-
clares under his responsibility that the machine is safe for
persons and things.
Alternative markings can be affixed according to the target
markets, provided they comply with current product regula-
tions.
The nameplate which provides the appropriate markings,
identification data and specific technical data, is affixed un-
der the drain tray.
An example of a nameplate is provided below.
TRADEMARK
WEGA MACCHINE PER CAFFÈ S.r.l.
Via C. Bardini, 1 SUSEGANA (TV) - ITALY
Tel. +39.0438.1799700 - Fax +39.0438.1884890
S/N:
V
When contacting the Manufacturer, always provide the fol-
lowing information:
• S/N - machine serial number.
• Mod. - machine model.
• Y - year of manufacture.
The appliance data can also be found on the label located on
the machine's packaging.
14 100
of
1GR
2200-2330 W
2700-3300 W
50-60 Hz
5,5-6 l
Y
Mod.
Hz
W
MADE IN ITALY
COMPR. 2GR
2900 W 2330-2930 W
2900-3100 W 2800-4850 W
50-60 Hz 50-60 Hz
7 l 9,5-10,6 l
0,19 MPa (1,9 bar) +/- 0,015 MPa
0.08 - 0.14 MPa (0.8 - 1.4 bar)
0.15 - 0.6 MPa max. (1.5 - 6 bar max.)
0.8 - 0.9 MPa (8 - 9 bar)
5 - 35°C 95° MAX. R.H.
< 70 dB
It is forbidden to remove or modify the name-
plate. Should it deteriorate or become illegible,
contact the Manufacturer.
To correctly connect the machine to the electric
mains, refer to Chap. "12. WIRING DIAGRAMS" on
page 53.
3GR
---
4850-6300 W 5000-7900 W
50-60 Hz 50-60 Hz
15,5-17,2 l 23-23,8 l
The nameplate is affixed
under the drain tray
TECHNICIANS' manual
4GR
---