Assa Abloy Rixson 73ER Manual page 5

Model 73ER, Metal Frame
Installation
D. Install track to door.
1. Make sure slider and track components
are installed prior to installing track to
OR
door. See Step C.
2. Install track into top of door using
either four (4) 1/4-20 x 7/16" machine
screws for metal doors or four (4)
#14 x 1-1/4" wood screws for wood
doors. (Figure 5).
NOTE: If necessary, use optional
retrofit spacer (replacement
application only, consult factory).
E. Install closer.
1. Install closer into frame with four (4)
1/4-20 x 5/8" machine screws.
(Figure 6)
NOTE: Mounting plate should be flush
with frame rabbet.
F. Install cover plate.
1. Install cover plate to closer body with
six (6) 6-32 x 1/4" machine screws.
(Figure 7)
G. Attach arm to closer.
1. Attach arm to closer shaft with
1/4-20 x 3/4" FH-Allen w/Nylon Patch
screw and washer. Tighten securely.
(Figure 8)
NOTE: Ensure countersink recess
side of arm faces down.
2. Insert 10-24 x 1-1/2" socket head
cap screw into arm and clamp arm
tightly to pinion square. (Figure 8)
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
IS73ER Rev 1 10/21
Approved 2021-10-20
Hinge
Side
Figure 5
Figure 6
Figure 7
Arm Clamp
Figure 8
1/4-20 x 7/16 FHPMS (4 each)
or 14 x 1-1/4 FHPWS (4 each)
Countersink
Recess
Screw
Arm Screw and
Conical Washer
Optional
Retrofit Track
Spacer
5